• Please read the Technical Data Sheet for full instructions.
• Can dull the shine of highly polished marble, limestone & travertine surfaces.
• Carry out a test in an inconspicuous area.
• Do not allow the product to dry on the surface.
• If you find this product is not suitable for use on your project, do not continue to use.
• Typically, this product is applied via the TileMaster 40 machine at a dilution of 1:4. but may be possible to use neat for tough build ups or a lower dilution for very mild contaminations.
• Mask off surrounding varnished, painted the product may encounter.
• Apply to the surface, agitate and rinse away with clean water within a few minutes. Do not allow to dry on the surface.
• Rinse away with Porcelain Cleaner, Natural Stone Cleaner or plenty of clean water and allow to dry.
• Repeat as required.
• When using indoors ventilate the area.
• Safe for children, pets, and wildlife when dry.
• Coverage rates will vary depending on the porosity of the surface, level of soiling & dilution rate.
  

Highly effective cleaner for dirty and grimy floors

Heavy Duty Cleaner is highly effective at cleaning really dirty heavily marked tiles & grout where other general household cleaning products have failed. Heavy Duty Cleaner is a highly effective solution designed for deep cleaning heavily soiled floors. It’s suitable for ceramic, porcelain, honed marble, limestone and travertine, slate, sandstone, terracotta, quarry tiles, and other natural stone surfaces.

Heavy Duty Cleaner outperforms regular household cleaners, delivering superior results on smooth, textured, anti-slip tiles and any surface prone to rapid grime buildup. This cleaner has a special blend of cleaning agents which dissolve ingrained dirt and grime. It is a highly effective deep cleaning solution for use on non and textured surfaces which become ingrained with dirt. This includes textured and anti-slip porcelain tiles. If you have a pet which causes a rapid build up of grime on textured anti-slip tiles this product is the answer!

This product is suitable for use on ceramic, porcelain, marble, limestone, travertine, granite, sandstone, slate, terrazzo, and terracotta. Heavy Duty Cleaner can dull the shine to highly polished marble, limestone or travertine surfaces so it's important to test before use. Once the surface is clean we recommend sealing the surface to protect the stone. Sealing the surface means it will resist water and oil-based staining, ongoing maintenance becomes easier. We have various sealers available to suit any requirement. Our range of sealers can be found here. 
Available in 1 litre and 5 litre bottles. Please read the full instructions & related information contained within the Technical Data Sheet. If you require help choosing a sealer or cleaning product please feel free to contact us on (0161) 444 0377. You can email us at [email protected].

Dilution Rate per 1 litre

Deep cleaning and degreasing – 1:4 – 15sqm

Grout Haze Removal – 1:4 –  15 sqm

Technical Data Sheet

MSDS

Heavy Duty cleaner can be used on calcium surfaces, such as marble, limestone, travertine & cement-based tiles, however, it can dull the shine of a highly polished marble, limestone or travertine surface.

Yes, these surfaces are perfect for Heavy Duty Cleaner.

Yes, these surfaces are perfect for Heavy Duty Cleaner.

Removing cement and grout haze from acid sensitive surfaces can be difficult and may require our diamond pad system. You should test Heavy Duty Cleaner before use.