Porcelain cleaner

Porcelain Cleaner is a powerful porcelain tile cleaner that is suited to cleaning existing and newly laid porcelain tiles.

Porcelain Cleaner can also be used to remove ingrained dirt and soils which has becomes ingrained into the tiles.

This product is suitable for all internal and external porcelain tiles.

If you are cleaning up a porcelain tile after the winter, you may be interested in our Algae and black spot remover which specifically targets organic contaminations, such as lichen, green algae, slime, bird droppings, leaf staining & general grime.

Available in 1 litre and 5 litre bottles.

Please read the full instructions & related information contained within the Technical Data Sheet. If you require help choosing a sealer or cleaning product please feel free to contact us on (0161) 444 0377. You can email us at [email protected]

Product information

    • Please read the Technical Data Sheet for full instructions.
    • Carry out a test in an inconspicuous area.
    • If you find this product is not suitable for use on your project, do not continue to use.
    • Typically, this product is applied via the TileMaster 40 machine at a dilution of 1:4. but may be possible to use neat for tough build ups or a lower dilution for very mild contaminations.
    • Mask off surrounding varnished, painted the product may encounter.
    • Apply to the surface, agitate and rinse away with clean water within a few minutes. Do not allow to dry on the surface.
    • Rinse away with Porcelain Cleaner diluted at 1:200 or plenty of clean water and allow to dry.
    • Repeat as required.
    • Safe for children, pets, and wildlife when dry.
    • Coverage rates will vary depending on the porosity of the surface, level of soiling & dilution rate.

  • Porcelain Cleaner for cleaning all porcelain tiles & patios

    A specialist ceramic and porcelain tile cleaner for the removal of general dirts on new or existing installed tiles. Easy to use with the TileMaster 40

    When cleaning porcelain tile floors, you must consider that modern fully-vitrified and semi-vitrified porcelains are often matt finish and slightly textured leading to a build-up of dirt and grime. Porcelain Cleaner will remove general dirt and grime

    Simply dilute the product, apply directly to the surface and agitate with with the TileMaster 40. You can use more product as and when needed. Thoroughly rinse the tiles after use at 1:200 or plenty of clean water and allow the surface to dry. This porcelain cleaner is safe to use on any type of internal or external porcelain tile where thorough cleaning is required, be it polished, smooth or textured porcelain tiles or matt porcelain tiles. The coverage rates will vary from 15m2 per litre and upwards, depending on the level of contamination and type or texture of the porcelain.

  • Dilution Rate per 1 litre

    Deep cleaning and degreasing – 1:4 – 15sqm

    Tile and grout refresh – 1:12 – 45 sqm

    Maintenance Clean – 1:50 – (polished surfaces may require a dry buff)

    Daily Clean – 1:200 (one cap in 5ltrs water)

  • Technical Data Sheet

    MSDS

FAQ's

  • Natural stone cleaner should be used on calcium surfaces. Such as marble, limestone, travertine & cement-based tiles.

  • Natural stone cleaner should be used on calcium surfaces. Such as marble, limestone, travertine & cement-based tiles.

  • Yes, this is the perfect product