Natural Stone Cleaner

Natural Stone Cleaner is a powerful stone tile cleaner that is suited to cleaning existing and newly laid natural stone tiles.

Natural Stone Cleaner can also be used to remove ingrained dirt and soils which has becomes ingrained into the tiles.

This product is suitable for all internal and external stone tiles.

If you are cleaning up a stone tiles after the winter, you may be interested in our Algae and black spot remover which specifically targets organic contaminations, such as lichen, green algae, slime, bird droppings, leaf staining & general grime.

Available in 1 litre and 5 litre bottles.

Please read the full instructions & related information contained within the Technical Data Sheet. If you require help choosing a sealer or cleaning product please feel free to contact us on (0161) 444 0377. You can email us at [email protected]

Download Datasheet

Product information

    • Please read the Technical Data Sheet for full instructions.
    • Carry out a test in an inconspicuous area.
    • If you find this product is not suitable for use on your project, do not continue to use.
    • Typically, this product is applied via the TileMaster 40 machine at a dilution of 1:4. but may be possible to use neat for tough build ups or a lower dilution for very mild contaminations.
    • Mask off surrounding varnished, painted the product may encounter.
    • Apply to the surface, agitate and rinse away with clean water within a few minutes. Do not allow to dry on the surface.
    • Rinse away with Natural Stone Cleaner or plenty of clean water and allow to dry.
    • Repeat as required.
    • When using indoors ventilate the area.
    • Safe for children, pets, and wildlife when dry.
    • Do not use on acid sensitive surfaces!
    • Coverage rates will vary depending on the porosity of the surface, level of soiling & dilution rate.

    http://www.w3.org/2000/svg">

  • Natural Stone Cleaner for cleaning all natural stone tiles & patios

    A specialist natural stone cleaner for the removal of general dirts on new or existing installed tiles. Easy to use with the TileMaster 40

    Simply dilute the product, apply directly to the surface and agitate with with the TileMaster 40. You can use more product as and when needed. Thoroughly rinse the tiles after use at 1:200 or plenty of clean water and allow the surface to dry. This natural stone cleaner is safe to use on any type of internal or external stone tile where thorough cleaning is required, be it polished, smooth or textured tiles. The coverage rates will vary from 15m2 per litre and upwards, depending on the level of contamination and type or texture of the stone.

  • Dilution Rate per 1 litre

    Deep cleaning and degreasing – 1:4 – 15sqm

    Tile and grout refresh – 1:12 – 45 sqm

    Maintenance Clean – 1:50 – (polished surfaces may require a dry buff)

    Daily Clean – 1:200 (one cap in 5ltrs water)

  • Technical Data Sheet

    MSDS

FAQ's

  • Natural Stone Cleaner is perfect for use on calcium surfaces. Such as marble, limestone, travertine & cement-based tiles.

  • Natural Stone Cleaner is perfect for use on calcium surfaces. Such as marble, limestone, travertine & cement-based tiles.

  • No, Natural Stone Cleaner is perfect for use on calcium surfaces. Such as marble, limestone, travertine & cement-based tiles. For Porcelain you should use Porcelain Cleaner

  • Removing cement and grout haze from acid sensitive surfaces can be difficult and will require our diamond pad system or Heavy Duty Cleaner. You should not use Grout haze, cement and plaster cleaner on acid sensitive surfaces.